Revolvers can truly be a passion. Those of you who love them as I do know what I mean. There's just something about the raw simplistic power and rugged attraction of a revolver.

I attempt to maintain these qualities in every custom revolver I build. Whether I'm machining and installing a custom match grade barrel or working with the original classic features, I seek to preserve the timeless appeal of the wheelgun.


Pricing
GENERAL TUNING SERVICES
Complete Action Job $80.00
Bob & Polish Hammer $30.00
Narrow, Rnd, & Polish Trigger $30.00
Overtravel Stud $30.00
Crane Ball Lock $30.00
High O.S Cyl. Release $30.00
Straighten Crane $30.00
Straighten ejector rod $25.00
Remove endshake $25.00
Stipple backstrap $70.00
Bevel front edge of cylinder $35.00
Chamfer & Polish Cylinders, per hole $ 6.00
Ribs, Lugs, Sights & Timing P.O.R.

Convert Square butt to Round butt                                                $95.00         

CUSTOM BARREL MACHINING
Dbl. & Triple Port Comps, Start $145.00
Tornado Cone Porting, per port $25.00
(5) for $100.00
Cross Porting $45.00
Competition Target Crowning $40.00
Match Grade Bull Barrels P.O.R.
Turn Back Barrel / Cyl. Gap $75.00
Re-cut forcing cone (standard cut)
Taylor thoating
 $25.00
$75.00
Install interchangeable front sight system $85.00
Shorten barrel, re-contour, crown, and install Interchangeable front sight system $189.00
 
*CHECK OUT THE "REVOLVER GALLERY" TO SEE SAMPLES OF CUSTOM MACHINE WORK!
 

SCOPE MOUNTS AND CUSTOM SIGHT WORK
Depends on style, Starts at :
Drill & Tap older model S&W for 3 hole mount:
 $30.00
$35.00

CUSTOM REVOLVERS FOR COMPETITION, CARRY AND RECREATION, ICORE, IDPA, IPSC, PPC, HUNTING, STEEL & PIN SHOOTING

CUSTOM WORK AVAILABLE FOR SMITH & WESSON, RUGER, COLT AND TAURUS
*CALL TO CHECK AVAILABILITY OF WORK FOR YOUR MODEL*
 
-MOONCLIP CONVERSIONS-


 
(S&W 7-shot L-frame shown)
 
*Titanium cylinders can be cut for moonclips!
 
******************
 
* MULTI-caliber conversions*
 
*S&W 6-shot L-frame cylinders
Rechamber to 9x23 and shoot-
9mm, .38 super, & 9x23!
$250.00
 
*Ruger GP100-$255.00
 
*S&W 6-Shot K-frame
$250.00
 
*S&W 5-shot .38 caliber
J-Frames
rechamber to 9mm!
$225.00
 
*Ruger SP101-$230.00
 
(includes moonclip conversion)
Moonclips available @ TKcustom
 
*8-Shot PC 627's to,
9x23, .38 super, & 9mm
$275.00
(Gets re-cut for .38super clips)
 
**In regard to the caliber conversions, I do not recommend shooting .38/.357 case's in the cylinder once this conversion is done. The cases will fire form to the 9x23 case dimensions and they will most likely stick in the cylinder.
 
They will shoot, but they will probably stick. 
 
 Moonclips and a conversion produce a clean and useful alteration making your revolver easier and quicker to reload for competition, defense, hunting & recreation.

  • Smith & Wesson,
  • J-Frame 5 Shot .38/.357
  • K-Frame 6 Shot .38/.357 
  • L-Frame 581,681,586,686, 686 plus,.357's
  • 696 5 Shot .44Spl 
  • N-Frame 27/28, 57/657, 29, 629, & 625 LC.
  • X-Frame 500, & 460
  •  $80.00  

    (.45 LC cylinders can be cut to shoot both ACP and LC) 

    *S&W recessed cylinders $100.00


  • Ruger, SP101, GP100, Security & Speed -six, .38/.357, Redhawk & Super Redhawk, .44, .45LC, .454, .480,
  • *The .454 conversion can allow you to shoot .45acp, .45LC and .454 Casull in a single conversion. $85.00


  • Colt, Anaconda .44, .45LC,  Trooper & Python .38/.357 - $85.00


  • Taurus, 8-shot .38/.357 $85.00
  •             7-shot .38/.357
  •             5-Shot .38/.357 Small Frame 
  •             5-shot .45 Colt converted to .45 ACP

     
  • With a standard moonclip conversion you will still be able to shoot without using the moonclips.
  • On competition guns where there is a larger and deeper chamfer there is always the possibility of a light hit due to the case, head spacing off of the area that has been chamfered. I highly recommend using the moonclips during competition shooting.

    * Other conversions may be available, contact me for availability.

    *
    * Most conversions can be made by simply shipping the cylinder!
  •  
  •  
  • Return priority shipping for a cylinder is $7.00 and $1.00 for each additional cylinder.


    **All Moonclips and Moonclip accessories are available at TK Custom

      • PRO HUNTER REVOLVERS
    • All Makes and Models Big Bore Mags
    • Pro-Hunter Porting
    • Scope Mount & Crisp Action Job

    *Pro-hunter porting (only one side shown)

     

    - ATTENTION COWBOY SHOOTERS -


    • SINGLE ACTION REVOLVERS
    • ALL MAJOR MANUFACTURERS
    • CRISP, CLEAN, RELIABLE TRIGGER JOBS,
      STARTING AT $85.00
    • NAME YOUR TRIGGER PULL WEIGHT
    • RETIMING OF ACTIONS
    • TROUBLESHOOTING SERVICE
    • GENERAL REPAIRS

    Pinnacle High Performance
    9630 Ponderosa Ct
    Kempton, PA 19529
    Phone/Fax: (610) 285-4392
    info@pinnacle-guns.com

    Website © Pinnacle High Performance 2004